amhlee

引用:

原帖由 monza165 於 2011-4-13 Wed 11:00 發表

I2S Cable 冇問題
不如我開個post問下仲有冇人要,一次過整啦
機內排線 (USB to 田雨 I2S 小板) 可在那裡買?因個人喜好,多數都係DIY
其實我應買那隻牛牛陴 USB Board (7v ~ 10V) and I2S 小板 (7v ~ 10v)?買隻好 ...

為人民服務！

mdlover

some updates, i2s board mounted and back panel updated.

amhlee

唔錯！唔錯！

marvintai

會否把輸入電源改掉？

amhlee

剛剛 upgrade to 32 bit. 可惜無 DAC 可以 support.......

amhlee

Upgrade 可以用 Mac 來做，亦可以用 window. Mac 就麻煩的，要用 command mode, terminal....
剛剛連上 DAC，聽感上還是和原來的分別.....值得昇級.....

[ 本帖最後由 amhlee 於 2011-4-20 Wed 21:48 編輯 ]

cvincent

mdlover hing,
請問個 usb spdif case 裝左 display 未呀?

rooster

引用:

原帖由 mdlover 於 2011-4-15 Fri 23:53 發表
some updates, i2s board mounted and back panel updated.

mdlover

some more updates, a translucent front panel installed with LED display,








sample rate of the current audio stream will be displayed, when the stream stop, display show "----"

sorry for the crappy photos, i just couldn't take great pictures like anthony does.......

mdlover

dear Mac users, a new custom app that is used for upgrade new firmware is in progress.

i know it's a bit inconvenient to use command line program in a terminal nowadays........

marvintai

請問在哪裡升級？如何找檔？

amhlee

個檔在我處，現在試緊！如無問題，就會發給你。
另外個箱看看有無問題........
個箱無位放 IEC 座，但可放電源，要引條線...

DeepSea^^

引用:

原帖由 marvintai 於 2011-4-24 Sun 17:20 發表
請問在哪裡升級？如何找檔？

你終於玩夠返來?

cvincent

引用:

原帖由 mdlover 於 2011-2-11 Fri 19:22 發表
i have built this for a friend using the same chassis that kmax2007 hing used.
from the photos, you can see a display which is used to show the current sample rate that is streamed by the computer. it's a simple 7-segment display and it's ............

hi mdlover & anthony hing, 可否用這個機箱? 看似靚仔 d !

amhlee

呢個後面放唔到 i2s....，係華輝有。

marvintai

引用:

原帖由 DeepSea^^ 於 2011-4-24 Sun 23:32 發表

你終於玩夠返來?

你估錯了，我還在上海。

medicalking

用SPDIF 有無特別要SET (我用 MAC)

試左幾部DAC 都係LOCK 唔到SIGNAL

medicalking

引用:

原帖由 medicalking 於 2011-5-13 Fri 00:49 發表
用SPDIF 有無特別要SET (我用 MAC)

試左幾部DAC 都係LOCK 唔到SIGNAL

fixed.. forgotten that need to change back to 192 K

marvintai

After few attempts, I can now control my windows XP iTunes with my iPad2 apple remote apps. However, I am not able to hear any music when I play the music in iTunes.
Can someone teach me how to export the iTunes sounds to the USB board?
Remark: I have no issue to play any music with Foobar2000 in the same computer.

amhlee

In the control panel. need to set the sound output device as USB .

medicalking

thinking able to re-use this case.....

marvintai

引用:

原帖由 amhlee 於 2011-4-24 Sun 17:52 發表
個檔在我處，現在試緊！如無問題，就會發給你。
另外個箱看看有無問題........
個箱無位放 IEC 座，但可放電源，要引條線...

USB 板電源輸入的背面，有三點，請問哪兩點接入 I2S 的電源輸入？

amhlee

用萬用表量一下咪知點係正負啦....

amhlee

拆驣了好一段時間...終於弄好了....I2S 放 CAS...真是無錯...

canda

引用:

原帖由 amhlee 於 2011-6-18 Sat 14:38 發表
拆驣了好一段時間...終於弄好了....I2S 放 CAS...真是無錯...

可喜可賀!

cvincent

板大，個機箱同display幾時有呀? 好想試玩cas!

amhlee

訂造要點時間.....

amhlee

唔知未訂塊 USB SPDIF interface 的，還有無人想訂，齊 10 個團購會有 discount...

[ 本帖最後由 amhlee 於 2011-6-18 Sat 23:45 編輯 ]

madox

Anthony兄,
係唔係呢個?
http://www.photo100fun.com/viewt ... &extra=page%3D2

amhlee

是的....